Tektronix 50M10
Analog Measurement Card
(A/D Converter)
Click on image for large view
| Analog Measurement Card (A/D Converter) | |
| The 50M10 Analog Measurement Card
(A/D Converter) is able to measure analog voltage in four ranges: 100mV, 1V, 10V, 100V.
Unlike traditional integrating digital millimeters, the 50M10’s short 400nsec
aperture time enables the measurement of voltages which hold their value for short time
intervals. A Guard signal at the input connector can drive guard conductors adjacent to
the input signal conductor. TTL compatible front panel control lines permit the 50M10
conversions to be triggered or gated. Conversion Results Available over GPIB or Front-Panel Connector. |
Amplifier Settling Time: 100mV
Range:<150us 1V Range: <25us 10V Range: <10us 100V Range: <30us Maximum Aperture Time: 400ns Input Impedance: 100mV-10V Range: >10^10ohms. 100V Range: 1Mohm Digital Data Transfer Format: 12-bit word transferred in two bytes. Common Mode Rejectn Ratio: 1ohm in low lead 100dB 1kohm in low lead 80dB Guard Output Resistance: Typically 870ohm. • 12-Bit Resolution to 50uV |
| Average Retail Price and Current Availability | |
| Price | $450 |
| Availability | In Stock |
| Functionality | Fully Functional |
| Condition | Used |
| Cables | Included |
| Accessories | None |
| Manual | Included |
| ATE | IEEE-488 |
Standard terms for used equipment: 5 day right of return, 30 day limited warranty.
Test Electronics, a leader in test fixture technology. Reducing test fixture costs by utilizing a large existing resource of used and reconditioned precision measuring equipment.
Show All
5000 Series MainFrame Plug-ins
Back to Used Equipment Overview
E-mail Applications Engineering
Go to Home Page
End of page