| The 8620C Sweep Oscillator
Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide
>10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3
to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate
bands and their respective frequency scales can be selected. Start-Stop sweep points may
be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec
per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW,
continuous wave, makes the sweeper a signal generator, which may be modulated, or allows
manual sweeps for frequency calibration. Other sweep modes include automatic, manual,
externally triggered, single sweep, and remotely programmed. A marker, selected by the
CW/Marker control, may be adjusted to any point on the band, and indicated by either
amplitude or intensity. Frequency: 3MHz to 18GHz
based on RF Plug-In
Sweep functions: Start-Stop, Delta, CW, Remote Programmed.
Sweep modes: auto, line, external.
Sweep time: 10 msec to 100 sec.
Sweep output: direct coupled, 0 to 10 V.
Modulation: Internal AM 1 kHz; External FM based on RF unit.
Marker: 1
Option 001 = Programmable Source |
The 86209B Sweep Oscillator
Plug-In is designed for 8620 Series Sweep Oscillators. Provides CW or Continuous Swept
2GHz to 18.6GHz frequency coverage. Power output is calibrated from 0 to +13 dBm in 1 dB
increments with ±0.25 dB flatness and excellent linearity (2MHz) over the entire
frequency range. |