TE2000 Ver 3.4 Headset
Test Software

General
The TE2000 Headset Test Software provides a user friendly high speed control interface for the TE2000 Test system.

Test Software Controls

  1. Six position scroll window displaying the test parameters for 5 different types of headsets and 1 Generic position for testing any style Headset.
  2. Three Line Status Windows displays:
    I. Selected Headset type
    II. Measurement action to take during test
    III. Action to take to continue test
  3. Test sound slide switch provides easy access to all test sounds and easy test incrementing
  4. [Stop] button stops current test
  5. [Voice Test] button provides a human voice for headset sound quality evaluation
  6. [Music Test] button provides music for headset sound quality evaluation.
  7. [Setup Help] button brings up a setup instruction window.
  8. [Calibrate] button provides a 1KHz tone and brings up a volume control window for quick easy system calibration.
  9. HEADSET / SPEAKERS Icon pictorially represents the switch position that the Computer Interface Box should be in to perform the test.

Test Process
The Picture above shows the Ref Xmit test step in testing the SP05 Headset. The Status Window (2) shows that the Headset under test is a SP-05 the DMM reading should be -10 +/-2 dBm and the technician needs to Press White Xmit to continue. The Headset Icon shows that the Computer interface Box HEADSET / SPEAKER switch should be set to HEADSET.
The test process is easy to learn and quick to execute:

First Select the Headset type to be tested
Second Perform the test in the Three Line Status Window
Third Perform all 6 steps on the Test Sound Slide Switch
Finally Press Stop when the Test is complete

Selectable Headsets Types

  1. SP-05 Headset
  2. M10 & H41 Headset
  3. M10 & H51 Headset
  4. M10 & H81 Headset
  5. M10 & H91 Headset
  6. Generic Headset Test Mode

Minimum System Requirements:
IBM PC compatible 600MHz Pentium
8 Meg of RAM.
800 x 600 color VGA Monitor
Microsoft Windows 98, all Windows NT Operating Systems

Additional features with version 3.4

  1. Independently adjustable calibration levels for each test sound
  2. Automatic Balance Control (test sounds on left, sound effects on right)
  3. Computer interface box switch position icon.
  4. Menu system
  5. Headset menu now displays the test limits Excel file.
  6. Automatic control over Headset / Speaker output (replaced mechanical switch).
  7. Varistor test
  8. +10dBSPL Gain Button
  9. -20dBV Gain Button

Download Software (Requires Hardware)
View Adobe PDF File
Back to Test Equipment
E-mail Technical Support
Go to Home Page
End of page