Mechanical / Pneumatic Test Fixture

Pneumatic / Mechanical fixture
The circuit board to be tested is placed in the fixture with the primary side to be probed facing up. The top fixture plate is stationary and holds primary side test pins. The bottom fixture plate holds tooling pins and a secondary set of test pins. When actuated the bottom plate moves up to test the board.

Products
TE-5500 Manual Bed of Nails Fixtures
TE-5000 Manual Bed of Nails Fixtures

Features

1. Primary top access provides longer and cleaner probe life.
2. Top and bottom probe access.
3. Solid locators eliminate registration errors.
4. Pneumatic or manual operation allows convenient use anywhere.
5. High accuracy roller bearings.
6. State of the art anti sway technology .
7. Does not require balanced probe placement.
8. Easy access rear panel signal I/O.

Mechanical

1. High accuracy roller bearings combined with state of the art anti sway technology holds tight tolerances over long term industrial use.
2. Controlled speed and pressure.
3. Two handed safety switch interlocks.
4. The chassis is built with industrial strength .090" aluminum, reinforced with a heavy duty 3/8" aluminum inner frame.

Back to Bed of Nails Fixtures
 E-mail Applications Engineering
Go to Home Page
End of page