Test Electronics produces fixtures to help support products through all stages of development, from R&D efforts, to mass production, then finally, customer support.

Test Electronics' fixtures and test equipment reduce production costs and boost product quality. Test Electronics puts final test on the end of the production line where it should be. Assembly fixtures and test equipment are designed to work together to provide more precise control over production lines. The best method for controlling any process is good feedback control. But isn't good feedback control expensive? Not if you use our products at Test Electronics. Feedback control must provide fast results. Good Feedback control means to test the finished parts immediately as they come off the production line, then adjust the process as necessary to correct any deviations. The faster this can be done the better. Once a good feedback control process is implemented successfully, new production techniques can evolve and production equipment and processes can be fine tuned to produce a product faster and of a higher quality. The key to a good feedback controlled system is testing speed. Unfortunately, good high speed testers are very expensive, almost unaffordable. Lower cost testers are not really fast enough to keep up with production. So, most end up sacrificing speed for a slow, more affordable tester. They do sample testing, and end up with a sort of good feedback controlled system. Right? Our engineers at Test Electronics disagree, and we can show you how to use our products to create an automatic conveyor based production line that flows smoothly and gives you the feedback you need with 100% testing. Be sure to contact us before your competition does. Discover how our products can make your production lines run faster, keep your product quality high, and keep equipment costs down.