- Janitor You pick your own working hours!!
Part Time janitorial position still
open. We will hire qualified persons immediately,
PLEASE APPLY NOW!! This position
will go soon
We are seeking a hard
working talented person to help keep our facility clean and perform minor interior repairs
and general maintenance. Knowledge of chemical cleaners and operation of power
cleaning tools is required. Basic knowlege of interior construction techniques involving
door hanging, window removal, trim and molding replacement, plumbing, and painting is a
plus. Must be creative and have the ability to work independently as well as with others.
Part time Monday-Friday. Weekend work is also needed. Pay rate is $8-$20/hour depending on
experience. Request the pay rate you expect and working hours that you prefer.
- Landscaper, Groundskeeper, Gardener,
Maintenance
Part Time groundskeeper
position still open. We will hire qualified persons immediately,
PLEASE APPLY NOW!! This position will go soon
We are seeking a hard working talented person to help maintain and
improve the looks of our facility. You will be responsible for maintaining and creating an
attractive surrounding. This is an entry level position. Experience is not necessary, but
it helps to have experience with motorized lawn maintenance equipment, sprinkler systems,
planting and transplanting, weed removal, and insecticide usage. Knowledge of basic
construction techniques involving cementing, woodworking, and painting is a plus. Must be
creative and have the ability to work independently as well as with others. ***Only one
position left***
Part time Monday-Friday 1pm- 5pm, pay rate is $8-$20/hour depending on experience. Request
the pay rate you expect and working hours that you prefer on your application or resume.
- Shop Hand
Plan to hire in Mar 2004. Please
e-mail or fax your resume so we can keep it on file for future reference.
We are seeking a mechanically inclined talented person with a positive attitude to join
our model shop group. You will work to help support a small team of experienced model shop
personal to bring a series of products into the world for test fixturing applications.
Knowledge of tools, screw sizes, screw types, cutting bit sizes, is required. Must
have good knowledge of tools and hardware and the ability to work independently as well as
with others.
- Entry Level Machinist
Planning to hire in April 2004.
Please e-mail or fax your resume so we can keep it on file for future reference.
We are seeking a mechanically inclined talented person with a positive attitude to join
our model shop group. You will work as part of a small team to bring a series of products
into the world for test fixturing applications. Experience in machining Aluminum, 303 and
304 Stainless Steel, G-10, FR-4, Delrin plastic, and Polycarbonates is a plus, but we are
willing to train the right person. Must have good basic machining skills and the ability
to work independently as well as with others. Two job openings are available. Starting
levels are part time positions. You may choose your working hours. You may choose to work
from 12 noon to 4pm. or work from 5pm to 9pm. Make sure to request the working hours that
you prefer on your application or resume.
- Sheet Metal Worker
Planning to hire in July 2004.
Please e-mail or fax your resume so we can keep it on file for future reference.
We are seeking a mechanically inclined talented person with a positive attitude to
join our model shop group. You will work as part of a small team to bring a series of
products into the world for test fixturing applications. Experience with 5052, and 6061
Aluminum, Cold rolled steel, and 304 stainless steel sheetmetal is a plus, but we are
willing to train the right person. Must have good metal working skills and the ability to
work independently as well as with others.
- R&D Assembler, Prototype
Circuit Board Component Assembly.
Plan to hire in Sept 2004.
Please e-mail or fax your resume so we can keep it on file for future reference.
Tired of working hard and not getting any recognition? Want more recognition faster
promotions and higher pay? If so, this is the high profile job for you!
We are seeking a talented person with experience in circuit board assembly to join our
R&D (Research and Development) group. You will be working with our engineers and
R&D technicians, under the close supervision of corporate management in our high
profile Research and Development department. You will work as part of an elite highly
educated group of scientists to bring a series of products into the world for test
fixturing applications. Despite the close supervision of corporate management, the work
environment is fun, upbeat and humorous to support creative thinking. Little attention is
paid to trivial details like dress, procedure, non-essential paperwork, and standard work
formalities. Emphasis is placed on simply doing whatever it takes to get the job done.
Every day you will have an exiting new task. You will have about 1/2 hour to learn it, 5
hours to get it done, 1/2 hour lunch, then you will probably never do that same task
again. Applicants must have good communication skills, a basic knowledge of electronics
terminology, and a good sense of humor. Abilities must include surface mount and through
hole component assembly, printed circuit board inspection, cable assembly, and the use of
basic bench top test equipment. Ability to read drawings on your own is not required to
start, but the ability to understand drawings enough to learn how to read them is
required. Technical knowledge of electronic circuits is not required to start, but you
will be required to learn the basics. Must have the ability to work independently as well
as with others. Must have the ability to perform well, learn fast and think clearly. We
will expect applicants for this position to have a high performance track record. We want
to hear about your past promotions, letters of recommendation, awards like employee of the
month awards, and any other outstanding achievement awards you may have received. This is
the ultimate extreme worker's job, it will strain your brain! This job not only promises
that you will learn a lot, but it demands that you learn a lot and learn it fast. Because
of the tough demands, we recommend 6 hour shifts instead of eight. Two job openings are
available. The department is open from 9:00am to 12 midnight. You may choose your working
hours. Parents with school children may work from 9:00am to 3:00pm or what ever variation
accommodates your schedule. Second job seekers or students may work 4 hours, 5:00pm to
9:00pm. If you have a preference, make sure to request the working hours that you prefer
on your application or resume.
|
We are
presently seeking to fill the following contractor positions After Hours Janitor
Urgently Needed Please
contact us soon!!
We are seeking a hard working
talented person to help keep our facility clean and perform minor interior repairs and
general maintenance. Knowledge of chemical cleaners and operation of power cleaning
tools is required. Basic knowlege of interior construction techniques involving door
hanging, window removal, trim and molding replacement, plumbing, and painting is a plus.
Must be creative and have the ability to work independently as well as with others.
Part time Monday-Friday 6pm- 10pm suggested. Weekend work is also needed. Pay rate is
$8-$20/hour depending on experience. Request the pay rate you expect and working hours
that you prefer.
Heavy Equipment Operator
Parking lot and entry way reconstruction. Also some hillside erosion filling is
required. Need the work done now before the rainy season!
Test Equipment Repair
We are seeking a technician capable of repairing test equipment on call on a contractor
basis to help us when we get overloaded with work. Must have experience working with
precision measuring equipment, preferably in a calibration lab. Must be able to work on
site at our Watsonville location. We need contractors available on weekdays, weekends and
after hours. Please specify your availability. This may be a good second job for trained
calibration and repair technicians out there. Email us your brochures or qualifications
briefs.
Website Development
I need help with this website! I need a CGI programmer to improve the looks and operation
of this website. Temporary contract work. Can be done at your location. Experienced CGI
and Pearlscript programmers only. I can handle the easy HTML and Javascript. The first
thing I need is help with the list search program in the used test equipment section.
Currently the search results only returns links. I would like the search results to return
both links and thumbnail images. The thumbnail images use the same file nameing convention
as the html file that they call. My second problem is the employee resume writer. I don't
know how to do more than basic text output. I would like the output to be formatted more
neatly. Send an e-mail to personal asking for me, Walter Davis.
Postal mail your resume to:
Test Electronics
Personnel Dept
821 Smith Road
Watsonville CA. 95076
Making a Resume:
If you do not have a resume, just use our Resume Writer to create
one and send it to us. You may also give us a call to let us know that you sent your
resume, and we will discuss your qualifications.
Don't waste hours commuting Hwy 17
and rack up high mileage on your car when you can work close to home.
Check out our location:
Pop up window map to Test Electronics:
![[ Yahoo! Maps ]](http://us.yimg.com/i/yahootogo/buttons/yahoo_maps.gif) or 
You could even be athletic, ride your bike to work. Bring
your bike
on the bus to get safely through the busy streets. Public transportation to Test
Electronics Metro
bus Route 75 - Green Valley get off at [C]
intersection of Casserly and Wheelock. Ride East (toward the mountains) on Casserly for
1.1 miles, turn left on Smith Road, ride another 1.6 miles and you are here.
E-mail the Personnel Dept.
Go to Home Page
End of page |
