Test Electronics
Pre-Production Modular Bed of Nails Test Fixure
Adjustable Press Plate on Standard Clamshell Production Test Fixture
Edge Press Technology Tests Multiple Boards in Panelized form
Six Sided Final Assembly Functional Test Fixtures (showing 5 sided version)
Pneumatic Bed of Nails Test Fixure
Electronic Test Equipment Tailor Made for Special Testing needs.
Process Carrier Pallets Wave Solder or IR Reflow -> Wash -> Test.
Used - Reconditioned and Used Test Equipment
All ProductsCalibration Fixture Vertical Sampling Heads industrial
The 067-0572-01 Normalizer Head is a calibration fixture that is designed for use with vertical sampling plug-in units that utilize sampling heads.
42" long Coaxially Shielded industrial
Tektronix 067-0616-00 Calibration Fixture Flexible Plugh-in Extender. Allows user to calibrate and repair plug-ins outside of the oscilloscope. Total Length 42" long. High speed signals are coaxially shielded. Heavier gage wire is used for power and ground pins. 
42" long Coaxially Shielded industrial
Tektronix 067-0616-00 Calibration Fixture Flexible Plugh-in Extender. Allows user to calibrate and repair plug-ins outside of the TM500 series main frames. Total Length 42" long. High speed lines are coaxially shielded. Heavier gage wire is used for power and ground pins. 
150MHz Bandwidth Digitized Waveform industrial
The 2430 Dual Trace Digital Storage Oscilloscope offers 150MHz bandwidth, 5ns/div maximum sweep speed, a digitizing rate of 100 Mega samples/sec with 8-bit resolution, and dual channel simultaneous acquisition. With its advanced feature set, the 2430 can meet your general purpose measurement needs while offering the advantages of a digitized waveform including long term storage for future reference, data transfer, and waveform analysis, making the 2430 a powerful systems component. Other exceptional features include full screen readout and extensive cursor functions for easy operation and measurements, complex triggering capabilities, envelope mode with 2ns glitch capture, save on delta feature (provides unattended Pass/Fail Testing), and full IEEE-488 programmability for interfacing with our Bed-of-Nails test systems and ATE applications. 
15 Channels 50MHz industrial
The 318 Logic Analyzer is a lightweight, portable unit which provides parallel and serial data acquisition capabilities. The unit permits 15 channels of data acquisition at speeds up to 50MHz. The unit features menu-driven user interface. 
100MHz 5 mV /div to 5 V/div industrial
The 464 Dual Channel Storage Oscilloscope is designed to display non-repetitive or slow moving signals. A portable unit with DC to 100MHz response. CRT mesh filter installed to minimize CRT faceplate radiation. Four signal-output BNC connectors on the rear chamber changes to a type that improves shielding of the connected signal leads. Features two modes of storage: Variable Persistence and Fast Transfer. Stored writing speed of 110 div/usec. Deflection factor from 5 mV /div to 5 V/div in a 1-2-5 sequence. Sweep rate of 5 nsec/div with X10 magnifier. Weighs 26 lbs.
12-Bit Resolution to 50uV 100mV, 1V, 10V, 100V industrial
The 50M10 Analog Measurement Card (A/D Converter) is able to measure analog voltage in four ranges: 100mV, 1V, 10V, 100V. Unlike traditional integrating digital millimeters, the 50M10's short 400nsec aperture time enables the measurement of voltages which hold their value for short time intervals. A Guard signal at the input connector can drive guard conductors adjacent to the input signal conductor. TTL compatible front panel control lines permit the 50M10 conversions to be triggered or gated. Conversion Results Available over GPIB or Front-Panel Connector. Amplifier Settling Time: 100mV Range:<150us. 1V Range: <25us. 10V Range: <10us. 100V Range: <30us. Maximum Aperture Time: 400ns. Input Impedance: 100mV-10V Range: >10^10ohms. 100V Range: 1Mohm. Digital Data Transfer Format: 12-bit word transferred in two bytes. Common Mode Rejectn Ratio: 1ohm in low lead 100dB. 1kohm in low lead 80dB. Guard Output Resistance: Typically 870ohm. 12-Bit Resolution to 50uV. Up to 100 dB CMRR @ 60 Hz. 250 V RMS Isolation. Built-in Track-and-Hold Amplifier. 32 us Conversion Time.
12-Bit Resolution ±10 V or ±20 mA Current Mode industrial
The 50M20 Converts digital data to ground isolated analog voltage or current selectable via an on-board switch. The floating output pair can set voltage or current bias points or simulate switch thresholds in precision analog circuits. TTL compatible lines at the front panel connector are provided to control conversion timing with an external system. 12-Bit Resolution. 250 V AMS Isolation. ±10 V Voltage Mode. ±20 mA Current Mode. Data Transfer via GPIB or Front-Panel Connector. 
16-Bit I/O +5 V or +15 Vmax External, Sink 40mA industrial
The 50M30 Digital Input/Output card provides 16 digital input and 16 digital output lines. The inputs accept data from switches, contact closures, and digital devices capable of supplying TTL output levels. The digital outputs provide TTL levels to control instruments, relays, indicators, etc.. The digital outputs can be configured for open-collector outputs by positioning internal jumpers. TTL compatible handshake lines at the front-panel connector allow synchronization data-transfers. Data Outputs: 16 open-collector TTL (type 7406) with 2 kohm pull ups to internal +5 V or user supplied supply (15 V max). Logical "0" sink current up to 40mA for output of <0.7 V. Data Input Buffers: 16 LSTTL Schmitt triggers (type 74LS14). 16 Input and 16 Output Lines.
Mercury Wetted Reed 40VDC, 1A industrial
The 50M40 provides 16 independent, normally open relay contacts. The relay contacts can be used as switch closures to supply power to several external points from one source, or scan several sources and supply various inputs to a single measurement device. The desired relay configuration is set by internal jumpers. Three possible configurations include: 4 groups: 1 of 4 relays each. 2 groups: 1 of 8 relays each. 1 group: 1 of 16 relays. The relay scanning sequence, open and close operations, and triggering events are programmed thru the Ml 5010's GPIB interface. TTL compatible logic signals on the front-panel connector are provided for externally controlling the 50M40. Insertion Loss: <0.3dB to 1MHz. Pull In and Release Time: 3ms nominal. Maximum Applied Voltage: 40Vdc plus peak ac. Maximum Carry Current: 1A. Breakdown Voltage: 100Vdc plus peak ac. Contact Resistance: 0.15ohm nominal (end of life). 16 Mercury-Wetted Reed Relay Contacts. Configurable as I, 2, or 4 Independent Groups.
16-bit I/O port 10mA Source, 20 mA Sink industrial
The 50M50 16K-byle digital input buffer can be configured, under program control as a single 16-bit I/O port or as two 8-bit I/O ports. The buffer can be segmented to allow rapid switching between buffers relieving the controller of loading or dumping the buffer between test steps. The 50M50 is intended to be used as a digital-word generator and/or as a digital-data acquisition buffer. For example, digital initialization sequences are often required to place a unit under test into a known operating mode. Different sequences including required control and strobe lines can be embedded in different memory segments. Once the different patterns are loaded, the controller can jump between required output sequences without time-consuming reloading operations. When driven by an external clock the 50M50 can simulate state sequencing in a digital subsystem. As a word generator, it can be used with a D/A converter (50M20) to function as a waveform generator. Conversely, it can be used with an A/D converter (50M10) to function as a waveform digitizer. The 50M50 can transfer data on its two channels simultaneously. TTL compatible handshake lines permit synchronization with the users system. Data Outputs: 8 or 16 LSTTL (type 74LS646) lines. Logical "1" 2V at 10mA source current. Logical "0": <0.5 V at 20 mA sink current. Data Inputs: 8 or 16 LSTTL (type 74LS646) lines. Maximum Data-Transfer Rate: 8-Bit Transfers=200 kHz. 16-Bit Transfers: >120 kHz. 16K-byte Segmentable. Digital Input/Output. TTL Pattern Generation or Acquisition. Repeat Mode for Continuous Output. Single 16-Bit or Dual 8-Bit Channels.
Breadboard a GPIB Interface Specialized Function Card industrial
The 50M70 provides the means of developing (breadboarding) a unique circuit and interfacing it to the GPIB without the need for designing the GPIB interface. With the 50M70, the user can create a specialized function card to be used in the MI 5010 System from the component level! 50M70 development card shown with 50 conductor ribbon cable attached. Ribbon cable is supplied with each function card. The 50M70 contains two 16-bit interface-logic registers (type 68B21 PIAs) with a high level language interface into (be Ml 5010 GPIB system. A 4x4 inch breadboard area with power supplies permits circuit development. Typical 50M70 applications include analog and digital signal processors, timing. triggering and protocol generators, and keyboard and display emulators. The 50M70 is an ideal tool for developing ATE Automatic Test Equipment. Combine your own custom design with the power of off the shelf precision measuring test equipment plugins, A/D, D/A, relay multiplexing, and data I/O, and the possibilities are endless. Easy to program GPIB control commands configuration and I/O: Byte-wide outputs are made with "DATA (num)" commands. Inputs are made with DATA? queries. DC Voltage Sources Available on the Card: +26V and -26V±9% 100mA maximum. +8V±5% 600mA maximum. +5V ±5% 1.5A maximum. Total Combined Power Limit: 7.5W. 32 Data I/O Pods. Simple Interface to GPIB. Vector Board Development Area. +5V and Dual Analog Supplies. 1MHz crystal Clock Signal.
50MHz 1mV/div-50V/div industrial
The 5A48 is a dual-trace amplifier with five operating modes. Used in the 5000 series mainframes. The 5A48 features selectable trigger source and CRT readout. Bandwidth 50MHz. Rise Time: 7ns. Deflection:1mV/div-50V/div. Input: 1Mohm 24pF. Display Modes: CH1, CH2, CH2 Invvert, ADD, ALT, Chop.
50MHz 10ns-5s/div industrial
The 5B40 Time Base for use in 5000 series mainframe oscilloscopes. Sweep rates from 10ns-5s/div and provides a digital CRT readout of the sweep rate. Trigger coupling modes are AC, DC, HF reject LF reject. 10ns to 5s/div Calibrated Time Base. Triggering to 50MHz. Single Sweep Operation. F/LF Reject Coupling. External Horizontal Amp.
100MHz / 1GHz 10 mV/div industrial
The 7633 Storage Oscilloscope Mainframe provides a 100MHz, three compartment mainframe for the wide range of Tektronix 7000-Series plug-ins. The instrument has three display modes and four storage modes. The maximum writing speed of 1000cm/us is achieved in reduced scan mode. (Plug-ins shown above sold separately.) Sensitivities to 10 mV/div are available at 100MHz while 1GHz bandwidths can be achieved using the 7A21N direct plug-in. Sweep speeds up to 500 ps/div are available using the appropriate time base plug-ins. Using the P6201 FET probe, a high impedance with 900MHz bandwidth is possible. 
600MHz 3-Trace Operation industrial
The 7A19 Single-Trace Plug-In Amplifier is the basic building block of 3-trace operation. The unit features constant bandwidth for all deflection factors, trigger source selectivity and color-keyed control grouping Bandwidth: DC to 600MHz 
200MHz 5mV to 5V/div industrial
The 7A26 is a dual-trace amplifier that provides a bandwidth of 200Mhz in the 7000 series mainframes. With the appropriate mainframe, DC to 200MHz bandwidth is maintained constant over the entire range of delflection sensitivities of 5mV to 5V/div. Bandwidth may be limited to 20MHz to reduce displayed noise in lower frequency applications. The 7A26 feature five operating modes, trigger source selectability and trace identity. Bandwidth 200MHz (5mV to 5V/div). Deflection Factor. 5mV to 5V/div in ten steps. Input R and C. 1Mohm within 2%, 22pF. DC Stability. Drift with Ambient Temperature <0.02 division in any one minute after one hour warm up.
100MHz 5ns to 5s/div industrial
The 7B53A Time Base provides normal, intensified delaying, delayed, and mixed sweeps. Sweep Rate: Calibrated 5 s/div to 50ns in 25 steps. 5ns/div, the fastest calibrated sweep rate is obtained with the X10 Magnifier. Uncalibrated Variable Continuously variable between steps to at least 2.5 times the calibrated sweep rate. 5ns to 5s/div Calibrated Time Base. Triggering to 100MHz. Single Sweep Operation. Calibrated Mixed Sweep. Differential Delay Time Measurements.
500MHz 0.5ns to 0.2s/div industrial
The 7B92 Time Base provides normal, intensified delaying, delayed, and alternate sweep. Sweep Rate: Calibrated 0.2s/div to 0.5ns in 27 steps. Uncalibrated Variable Continuously variable between steps to at least 2.5 times the calibrated sweep rate 0.5ns to 0.2s/div Calibrated Time Base. Triggering to 500MHz. Single Sweep Operation. Alternate display of intensified delaying and delayed sweeps. Contrast regulation between delaying and delayed sweeps.
Test Semiconductor Devices to 0.5 Watts 10nA to 20mA/div Vertical, 0.5V to 20V/div Horizontal industrial
The 7CT1N displays characteristics of small signal devices to power levels up to 0.5W. Series Resistance: Automatically selected with horizontal V/div switches. STEP GENERATOR-Transistor Mode: 1uA-1mA/step amplitude range. FET Mode: 1uV-1mV/step amplitude range. Impedance 1Kohm +/-1%. Test Semiconductor Devices to 0.5 Watts. 10nA to 20mA/div Vertical Deflection Factors. 0.5V to 20V/div Horizontal Deflection Factors. Operates in 7000 Series Mainframes.
Delay Line industrial
50ohm Delay Line Plugin
14GHz 2mV to 200mV/div industrial
The 7S11 Sampling Unit uses plug in heads ranging in bandwidth to 14GHz. The 7S11 is a single-channel vertical module using the sampling plug-in head concept for 7000-Series sampling oscilloscope systems. The 7S11 can be used in a variety of configurations. Use with a 7T11A sampling timebase module for one channel, Use two 7S11's with one 7T11A for dual channel sampling. Use two 7S11's together (without a 7T11A) for X-Y operation. 2 to 200mV/div Calibrated Deflection Factors. Delay Range: A 10 ns delay range is available for comparing two signals in a dual channel combination. Vertical Signal Out: 200 mV per displayed division within ±3%. (source is 10Kohms). DC Offset Range: +1 to -1 VDC. Bandwidth and Input Z: Determined by the S-Series sampling head.
Lead Set industrial
92A60-90 General Purpose Lead Set 
1000A peak, 14KV isolation 20Hz to 1.2KHz industrial
The CT-5 High Current Transformer is designed to extend the current measuring capability of either the Tektronix A6302 current probe (used with the AM503 current probe amplifier) or the Tektronix P6021 current probe (use with the type 134 current probe amplifier). With either probe, the CT-5 extends the measurement range by a factor of up to 1000X. The CT-5 includes a pistol grip type handle with receptacles to accept the P6021 or A6302 in either of two positions, providing a choice of two current ranges. A sliding jaw on the transformer permits insertion of the current carrying conductor without breaking the circuit under test. The core and shield assembly is insulated from the windings and the handle allowing measurements on bare conductors with potentials to 3000volts. The accessory high-voltage insulation may be used to extend the allowable voltage to 14kV peak. The DC Bucking Coil and interconnection assembly nullifies the saturating effects of dc currents to 300amperes without appreciably degrading the transformer characteristics. Summary: Max continuous AC current:1000A peak from 20Hz to 1.2Khz @ 25degC ambient. Max pulse current: 50,000A peak. Max voltage isolation: 14kV peak.
Logic Analyzer Pattern Generator industrial
The DAS 9100 can be configured as a logic analyzer, as a pattern generator, or as a combination of the two. With appropriate modules (sold separately). Programming is made simple and menus/functions are accessed logically. The DAS 9100 fulfills the requirements needed for the design, manufacture, and service of digital products. Modular system architecture allows various instrument configurations, each tailored to meet specific testing requirements. This mainframe consists of a display monitor (9" raster scan CRT with 24, 80-character lines of display), 91A32firmware (Version1.1), a cassette drive, a functionally encoded keyboard , power supply, and controller module. 
135MHz 2 Channel A/B industrial
The DC5009 Programmable Universal Counter / Timer provides 135MHz in both A and B Channels. The powerful reciprocal frequency measurement technique allows up to eight digits of resolution in less than 1 second. 135MHz Both A & B Channels. 10ns Single Shot Resolution. 8 Digit Display. 5ps Resolution with Averaging. Reciprocal-Frequency measurement. Auto or selected averaging to 108 in all modes. Duty cycle independent autotrigger. Probe compensation. High stability oven time base.
DC to 100MHz 5mV to 5.5Vpp into 50ohms industrial
Measures frequency from dc to 100MHz with an internal prescaler being used for frequencies above 10MHz. Autoranging permits virtual hands off operation for most measurements. The 100x resolution multiplier automatically provides 0.01Hz resolution in one second or 0.001Hz resolution in ten seconds. The DC 504 features period and width averaging of up to 1000 events. Selectable dc coupling of the input eliminates the potential errors associated with making width measurements on signals of varying duty cycle with counters that are only ac coupled. DC to 100MHz. Period and Period Averaging. Width and Width Averaging. Autoranging. 100X Resolution Multiplier.
1.3 GHz 8 Digit Display industrial
The DC 508A single width Counter Plugin provides frequency measurements up to 1.3GHz. The powerful reciprocal frequency measurement technique allows up to eight digits of resolution in less than 1 second. 1.3 GHz 1ns Single shot Resolution. 8 Digit Display. 0.5ps Resolution with Averaging. 
Auto ranging A/C, DC, Ohms, Diode Math Functions, dB Calculation industrial
The DM5010 Programmable digital multimeter is a 41/2-digit autoranging Feature packed fully programmable digital multimeter. Double wide plug in module for the 5000-series mainframes. Full set of math functions with easy to use numeric keypad. Also programmable via GPIB. 41/2-Digits. Auto ranging DC Volts, Ohms, True RMS (ac or ac+dc). Diode Test. Comprehensive Math Functions. dB Calculations. Averaging Offset Scaling Hi/Low/Pass. IEEE-488.
200mV to 1000V, 200uA to 2A 200Ω to 20MΩ industrial
The DM 502A Digital Multimeter offers a compact solution to measurement needs without compromising performance. These instruments provide accuracy and flexibility on the laboratory bench , in field service, or in maintenance applications. Digits: 4 1/2 Digits. DC Range: 200mV to 1000V. DC Range: 200mV-1000V. AC/DC Current: 200uA-2A. Resistance: 200ohms - 20Mohms.
0.002Hz to 20MHz 20 Vp-p into 50-ohms industrial
The FG5010 Function Generator is designed to operate in a TM 5000-Series Power Module. The unit covers the frequency range from 0.002Hz to 20MHz while offering an output to 20 Vp-p from 50-ohms. Available waveforms include sine, square, triangle, pulse, and ramp with 10 ns rise/fall time. Features 10 to 90% variable symmetry in 1% steps. It also provides trigger, gate, counted burst, AM, FM, and VCF modes. This unit is easy to use via the front panel or programmed via the IEEE-488 interface Frequency Range: 0.002Hz-20MHz. Output: 20 Vp-p into 50-ohms. Available waveforms: Sine, square, triangle, pulse, and ramp with 10 ns rise/fall time. Variable Symmetry: 10 to 90% in 1% steps. Modes: Trigger, gate, counted burst, AM, FM, and VCF. Program: Front panel or IEEE-488 interface.
ATE Automatic Test Equipment Data Acquisition and Generation industrial
The MI 5010 Multifunction interface system consists of the MI 5010 Multifunction Interface, and six different function cards. These cards are capable of a variety of functions typically required in ATE Automatic Test Equipment, and functional testing system interfacing, data acquisition and generation, and process control. MI 5010 shown with side panel removed. In addition to providing power to function, the MI 5010 has sequencing capability, time of day clock, command buffer, and self diagnostics. The MI 5010 houses up to three function cards, in any combination. The MI 5010 provides the communication between cards and the system controller such as the Tektronix PEP 301 or the 2402 TekMate. The MX 5010 extends the M1 5010 control to six function cards at one GPIB address. Easy GPIB programming is done in simple English. For example, "VOLT 1.25" sent to the Programmable voltage Source Card generates 1.25 volts across the 50M20's output pair. Similarly, "VOLT?" sent to the Analog Measurement card queries the 50M10 for the value of the last measurement. In addition to providing the Interface between the function cards and the system controller, the MI 5010 has a built-in command buffer. This buffer is capable of storing up to 300 system commands and executing them in sequence. These comands can be triggered by the on-board time of day, the internal clock, or signals from the system controller. This frees the controller to direct activity elsewhere in the system. Simple English Programming example: With an active 50M20 voltage source card, the following sequence of Simple English commands are sent to the MI 5010 buffer: BUFFER ON. VOLT 1.25. WAIT 2. VOLT -1.25. WAIT 8. EXECUTE 100. This EXECUTES 100 cycles of a signal toggling between 1.25 and -1.25 Volts with a duty cycle of about 20% and a period of about 1 second. The MI 5010 system also supports tightly coupled test sequencing to optimize measurement throughput. TTL compatible "Ready" and "Done" handshaking signals can be enabled to step test sequences with minimal dead time and without time consuming controller intervention in multi instrument configurations. Cards rapidly slide in and out of the MI 5010 system for a fast flexible approach to test. Alternatively, for dedicated applications, card configuration can be secured in the MI 5010 with rear locking screws. Programmable Stimulus and Measurement System. Controller-Free Test Sequencing using Internal Command Buffer. Analog and Digital lnput Output.
6 Cards at one GPIB Rack and Stack industrial
The MX5010 is only needed if you wish to extend the MI5010 control to six function cards at one GPIB address. The MX5010 is shown above on the right. The MX5010 plugs into the side of the MI5010 with flex cable as shown above. Both units then plug into the TM5000 series mainframes as shown below. Total space used in the mainframe will be 4 positions. All cards shown above, MI5010 plugin, and mainframe shown below are sold separately. Cards rapidly slide in and out of the MI5010 and MX5010 system for a fast flexible approach to test. Alternatively, for dedicated applications, card configuration can be secured in the MI5010 and MX5010 with rear locking screws. Cards are programmable by GPIB or front panel connector. Rack and stack this and develop as large and complex of a test system as you need. Fabrication is simple using all off the shelf components. Maintenance is not an issue when using readily available precision measuring equipment plugins supported by calibration labs around the word. 
900MHz 10MΩ industrial
The P6201 FET Probe is an active FET probe with DC to 900MHz bandwidth and unity gain. The probe features: Low input capacitance. DC offset. AC to DC coupling switch. 0.4 ns risetime. The 1101A Power Supply may be needed if the equipment does not provide probe power. Retractable Probe Tip. 10X Attenuator Head. 100X Attenuator Head. 3 Probe Tips. Miniature Probe Tip Adapter. 12" Ground Lead. Ground Contact. Alligator Clip. Electrical Insulating Sleeve. Ground Contact Insulator. Probe Holder. Hard Plastic Carrying Case. Instruction Sheet.
500MHz 10MΩ industrial
The P6202A FET Probe is a low circuit loading active signal acquisition probe for 400 series, 2400 series, and 7000 series families of oscilloscopes. It provides a wide linear dynamic input range for accessing most digital device families using today's logic voltage levels. Attenuation: 10X/100x. Bandwidth at -3dB: 500MHz. DC Offset Range: ±55/200/V. System Input Resistance: 10 MΩ. Typical Input C: 2.0/2.0pF. Max Voltage: ±200V. Retractable Probe Tip. Alligator Clips (2). Probe Holder. 3 inch Ground Lead. Probe Adjustment Tool. 6 inch Ground Lead. Replaceable Probe Tips (2). Electrical Insulating Sleeve. Carrying Case. Instruction Manual. The 1101A Power Supply may be needed if the equipment does not provide an active probe power output jack.
250MHz to 10Hz 5V Output +/-5V industrial
The PG502 features fast rise and fall times, independent top and bottom pulse levels, and adjustable pulse duration. The fast rep rate makes the instrument ideal for design and testing of fast logic and switching circuits. 250MHz to 10Hz. 1ns Rise Time. 5V Output +/-5V Window. Independent pulse top and pulse bottom level controls. Selectable Internal Reverse Termination. Manual Trigger button. Optional Rise Time Limiter.
DC to 14GHz +1.0V to -1.0V industrial
The S-4 Sampling Head is a 25ps risetime unit. DC to 14GHz, 50 ohm input impedance. Variable DC Offset allows signals between +1 V and -1 V limits to be displayed at 2 mV/div. Displayed noise is < 5 mV unsmoothed, 2.5 mV smoothed. Bandwidth: DC-14Ghz. Risetime: 25ps. Displayed Noise: <5mV. Signal Range: +1Vto-1V. Input: Z=50ohm, Vmax=+/-5V. Input Connector: SMA (3mm).
Trigger Signal 25 picosecond Risetime 200 mV trigger output into 50ohms industrial
The S-51 Trigger Countdown Head is a high-speed, tunnel-diode trigger generator. The S-51 generates a trigger output from an input waveform. Trigger output allows operation with sequential sampling systems. 25 ps pulse risetime. 200 mV trigger output into 50ohms. Variable Sync. Input SMA 5Vpp max. Output BSM.
250kHz to 250MHz 5mV to 5.5Vpp into 50ohms industrial
The SG503 Leveled Sinewave Generator provides a bandwidths of 250kHz to 250MHz. The selected frequency is indicated by a built in autoranging frequency counter with a three digit LED readout on the front panel. Accurately calibrated output voltage is variable from 5mV to 5.5V peak to peak into 50ohms. Frequency Accuracy: Within +/-0.7 of one count of the least significant digit. Amplitude Range: 5mV to 5.5Vpp into 50ohms. Harmonic Content: Second Harmonic 35dB down. Third and all higher harmonics 40dB down.
1 ns to 5 sec 2-digit LED display industrial
The TG501 Time Mark Generator provides marker outputs from 1 ns to 5 sec. A unique feature of the TG501 is a variable timing output with a front panel 2-digit LED display. The display indicates percentage of timing error between the normal time interval and a variable interval that lines up the marker pulse with graticule or division marks on the display. This feature not only provides direct readout in terms of percent error, but also helps eliminate errors associated with visually estimating error from a display. Markers: 1ns-5s. Marker Amplitude: >1Vpeak into 50ohms 10ns-5s. >750mVp into 50ohms 2ns &2ns. >200mVp into 50ohms 1ns. Trigger output signal: Slaved to maker ouput from 100ns-5s. Remains at 100ns for all faster markers. Internal Time Base: Crystal 5MHz. Stability 1part or less in 107 per month. Timing error readout range: 7.5%. Timing error accuracy: indicated to within one least significant digit. 
Benchtop Accepts 500 and 5000 Plugins industrial
The TM5006 Power Module Mainframe provides all power required for up to 6 single slot plug-ins. The TM5000 series mainframes are the IEEE-488 controllable versions of the TM500 series mainframes. The TM5000 series mainframe will accept both 5000-Series (IEEE-488 programmable) and 500-Series plug-ins. A wide variety of available plug-ins include signal generators, power supplies, oscilloscopes, counters, DMM's, etc. Forced-air cooling is standard. Available in both rack and bechtop versions. Build your own IEEE-488 Custom Test Equipment from the component level up! The 50M70 Developers card provides a complete 32 Data I/O interface to a breadboard on which you can solder or wire wrap you own circuit design. Combine this with the 50M40 relay scanner to multiplex inputs and outputs and a 50M30 digital I/O card which accepts data from pushbutton switches to quickly build your own tester by efficiently leveraging off all these readily available off the shelf products. Next build even more by plugging in any of the wide variety of industrial standard plug-ins including signal generators, power supplies, oscilloscopes, counters, DMM's, etc. Using these techniques you can quickly and easily build IEEE-488 based Automatic Test Equipment tailor made for your testing needs. To top it all off, this Tektronix plug-in module based industrial standard precision test equipment is fully supported by most local calibration laboratories around the world.Rackmount Accepts 500 and 5000 Plugins industrial
The TM5006 Power Module Mainframe provides all power required for up to 6 single slot plug-ins. The TM5000 series mainframes are the IEEE-488 controllable versions of the TM500 series mainframes. The TM5000 series mainframe will accept both 5000-Series (IEEE-488 programmable) and 500-Series plug-ins. A wide variety of available plug-ins include signal generators, power supplies, oscilloscopes, counters, DMM's, etc. Forced-air cooling is standard. Available in both rack and bechtop versions. Build your own IEEE-488 Custom Test Equipment from the component level up! The 50M70 Developers card provides a complete 32 Data I/O interface to a breadboard on which you can solder or wire wrap you own circuit design. Combine this with the 50M40 relay scanner to multiplex inputs and outputs and a 50M30 digital I/O card which accepts data from pushbutton switches to quickly build your own tester by efficiently leveraging off all these readily available off the shelf products. Next build even more by plugging in any of the wide variety of industrial standard plug-ins including signal generators, power supplies, oscilloscopes, counters, DMM's, etc. Using these techniques you can quickly and easily build IEEE-488 based Automatic Test Equipment tailor made for your testing needs. To top it all off, this Tektronix plug-in module based industrial standard precision test equipment is fully supported by most local calibration laboratories around the world. Option 10 = Rackmount.
3 Instruments Mainframe industrial
The TM503 Modular Instrument Mainframe is a three slot mainframe designed to hold and provide power for the TM 500-Series of modular instruments. Up to three single width modules can be plugged in to the TM503. (Modules sold separately). Each mainframe comes equipped with front panel switch, tilt bail, and a handle. The right hand compartment is a high-power compartment. Plug-ins sold separately. The TM 500-Series of plug-ins includes oscilloscopes, function generators, scope calibration equipment, DMM's, counters and power supplies. Also choose from pulse generators, operational amplifiers, bandpass filters, and current probe amplifiers. You may be able to fit every instrument you'll need into one small mainframe. Plug-ins sold separately. Option 02 = Rear Interface. 
4 Instruments Mainframe industrial
The TM504 Modular Instrument Mainframe is a four slot mainframe designed to hold and provide power for the TM 500-Series of modular instruments. Up to four single width modules can be plugged in to the TM504. (Modules sold separately). Each mainframe comes equipped with front panel switch, tilt bail, and a handle. The right hand compartment is a high-power compartment. Plug-ins sold separately. The TM 500-Series of plug-ins includes oscilloscopes, function generators, scope calibration equipment, DMM's, counters and power supplies. Also choose from pulse generators, operational amplifiers, bandpass filters, and current probe amplifiers. You may be able to fit every instrument you'll need into one small mainframe. Plug-ins sold separately. Option 02 = Rear Interface.
6 Instruments Mainframe industrial
The TM506 Modular Instrument Mainframe is a six slot mainframe designed to hold and provide power for the TM 500-Series of modular instruments. Up to six single width modules can be plugged in to the TM506. (Modules sold separately). Each mainframe comes equipped with front panel switch, tilt bail, and a handle. The right hand compartment is a high-power compartment. Plug-ins sold separately. Pictured above is option 10, the rack mount version. Benchtop version also available. The TM 500-Series of plug-ins includes oscilloscopes, function generators, scope calibration equipment, DMM's, counters and power supplies. Also choose from pulse generators, operational amplifiers, bandpass filters, and current probe amplifiers. You may be able to fit every instrument you'll need into one small mainframe. Plug-ins sold separately. Option 02 = Rear Interface.