Test Electronics
Pre-Production Modular Bed of Nails Test Fixure
Adjustable Press Plate on Standard Clamshell Production Test Fixture
Edge Press Technology Tests Multiple Boards in Panelized form
Six Sided Final Assembly Functional Test Fixtures (showing 5 sided version)
Pneumatic Bed of Nails Test Fixure
Electronic Test Equipment Tailor Made for Special Testing needs.
Process Carrier Pallets Wave Solder or IR Reflow -> Wash -> Test.
Used - Reconditioned and Used Test Equipment
All Products"Q" Standard industrial
The HP 00518A "Q" Standard
Divider Tips, Tip Guards Grounding Clips industrial
The HP 10020A Resistive Divider Kit is a signal probing system for measuring fast transition signals in high impedance systems. It is designed for use with 50ohm systems if a 50ohm feedthrough termination is used. The extremely low input RC of the this probe provides high fidelity measurements of fast transition signals. Accessories supplied:
Isolation Tips, Divider Tips Various Grounding Clips and Adapters industrial
The HP 110710A Accessory Probe Kit contains a wide variety of probe types for various broadband sampling RF measurement jobs. Kit contains the following adapters. 11073A Pen-Type Isolator Permits the probe to be clipped on or connected to the point of measurement. 5060-0417 Pincer Jaw Alligator style clip. Permits the probe to be clipped on or connected to the point of measurement. 11061A 10:1 Divider Qty(2) Decreases input sensitivity by a factor of ten (gives 30V full scale). 11072A Isolator Provides DC Isolation. 8710-0084 Nut river Hand tool for probe adjustment. 10220A Microdot Adapter Permits connection of Isolator or 10:1 Divider to Microdot connector. 874-W50B 50 Ohm Termination Terminates signals in a 50ohm system 10219A Type 874A Adapter Permits connection of Isolator or 10:1 Divider to General Radio Co. Type 874 coaxial connector. 10218A BNC Adapter Permits connection of Isolator or 10:1 Divider to female BNC connector. 11063A 50 Ohm Tee Permits monitoring of the signal in a 50ohm system without disturbing the line or attenuating the signal on the line. Kit also contains the following small leads and clips. Ground Lead for pent type isolator (11073-62101), Ground Leads (5060-4991) qty(2), Ground Clips (10213-62102) qty(5), Probe Tips (5020-0457) qty(7), Banana Tip (1251-0013), Spring Tip (5060-04201), Pin Tip (5060-0418), Hook Tip (5060-0419). 
500MHz, 100Kohms <1 pF at 100MHz industrial
The HP 1120A Active Probe is a 500MHz probe for probing high source impedance at high frequencies. This 1:1 active probe provides a probe tip impedance of 100 Kohms shunted by approximately 3 pF at 100MHz. When used with the 10:1 or 100:1 divider tips, the shunt capacitance is <1 pF at 100MHz. 
Powers 4 Probes Individually Regulated industrial
The HP 1122A is a regulated probe power supply that provides all power requirements for simultaneous operation of up to four active probes.
500MHz, 100Kohms 50-ohm output industrial
The HP 1123A Active Probe is a 500MHz probe for probing high source impedance at high frequencies. This 1:1 active probe provides a probe tip impedance of 100 Kohms shunted by approximately 3 pF at 100MHz. When used with the 10:1 or 100:1 divider tips, the shunt capacitance is <1 pF at 100MHz. Kit Includes: 10:1 Divider, Bandwidth Limiter, 100:1 Divider, Slip-on Hook Tip, 2.5" Ground Lead, Spare Probe Tips, Slip-on BNC Probe Adapter, The 50-ohm output provides the optimum impedance match and measurement accuracy for oscilloscopes, spectrum analyzers, counters, and network analyzers with 50-ohm inputs. Power is supplied by instruments with probe power jacks or the 1122A probe power supply. 
20 Hz to 50 kHz BNC Connectors industrial
The HP 11473AImpedance: Unbalanced: 75 Ohms, Balanced: 600 Ohms, Type BNC Connectors, Frequency: 20 Hz to 50 kHz; ±0.5%; Max Input power: +13 dBm.
Data Rate Matching for Word Generator industrial
The HP 15401A Feed Through Module provides matching data rate for Word Generator.
4Hz to 2MHz 20 V P-P or 5VRMS into 600-ohms industrial
The HP 209A Oscillator is a small, lightweight, sine/square oscillator. Stable, accurate signals which can be synchronized with an external source are instantly available over a frequency range from 4Hz to 2MHz. Separate adjustable sine/square outputs are located on the front-panel. Distortion and flatness can be minimized at low frequencies by a rear-panel Low Distortion Mode switch. Sine wave output of 5 VRMS into (600-ohms) Square wave output of 20 V (p-p) into 600-ohms.
Printer Think Jet office
Hewlett Packard 2225D Think Jet Printer RS232 or HP-41CX calculator 
10MHz - 520MHz External Modulation AM/CW and Pulse industrial
The HP 3200B oscillator is a small, lightweight, sine wave oscillator. Stable, accurate signals which can be modulated with an external source are instantly available over a frequency range from 10 - 520 MHz. 10 - 520 MHz. in 6 bands. Accuracy +/- 2%. External Modulation input available in AM/CW and Pulse.
0.0001Hz to 5MHz 7.5 V P-P into 50 ohms industrial
The HP 3310B Function Generator is a small, lightweight, function generator. Stable, accurate signals which can be synchronized with an external source are instantly available over a frequency range from 0.0001 Hz to 5 MHz. Separate adjustable LOW/HIGH outputs are located on the front-panel. 0.0001 Hz to 5 MHz. 7.5 V p-p into 50 ohms. DC offset.
1µHz to 21MHz (sine), 11MHz (square), and 11kHz (triangle, ramps) 1 mV to 10 V P-P into 50-ohms industrial
The HP 3325A Synthesizer / Function Generator is a versatile and precision synthesizer providing frequencies from 1µHz to 21MHz (sine), 11MHz (square), and 11kHz (triangle, ramps). Frequency resolution to 1µHz below 100kHz and 1MHz above 100kHz are provided by the 11-digit display. Excellent choice for ATE Systems, completely HP-IB programmable. Options Include: Option 001 = High Stability Freq Reference, Option 002 = High Voltage Output. The 3325A includes a log/linear sweep function with variable sweep time and marker out, external AM and phase modulation, and variable phase offset when connected to another 3325A. Ten storage registers allow one to quickly change front-panel setups. Output is rated at 1 mV to 10 V P-P into 50-ohms. Frequency stability for the basic unit is an aging rate of ±5x10E-06/year.
Number of steps: 10, 100, or 1000. Time per step: 1, 3, 10, 30, 100, 300, 1000, and 3000 ms. industrial
The HP 3330B Automatic Synthesizer has the capability to digitally sweep frequency and amplitude. Offers a frequency stability of ±1x10E+08/day, -50 dB signal to phase noise with a constant resolution of 0.1Hz to 13MHz. Amplitude range from +13.44 dBm to -86.55 dBm in to 50-ohms, resolution of 0.01 dB. Harmonic distortion, with full output amplitude, is -60 dB (5Hz to 100kHz), -50 dB (100kHz to 1MHz), and -40 dB (1MHz to 13MHz). 100 mV rms/50 ohms Tracking Output (20 to 33MHz ). 1MHz Reference Output 220 mV rms/50 ohms (0 dBm/50 ohms). Step size is continuously adjustable in 0.1Hz increments. Number of steps: 10, 100, or 1000. Time per step: 1, 3, 10, 30, 100, 300, 1000, and 3000 ms. Sweeps up, down, or both. 
0.10 mVAC to 1000 VAC True RMS DC to 100 MHz industrial
The HP 3403C is a True - RMS Voltmeter, measuring DC and AC - voltages within the frequency range of DC to 100 MHz. Full range display: 10.00 mV to 1000 V. Six ranges. 3½ digit display. Ideally suited for measurements for modulated carriers and multiplex signals, noise- and other complex waveforms measurement. Full range display of 10 mV (AC only), 100 mV, 1 V, 10 V, 100 V, and 1000 V. Functions include: DC, AC, and AC + DC, 3 1/2-digit display. Frequency response from DC to 100MHz. Response times of 1 sec and 10 sec. 
10kHz to 1.2GHz Bandwidth -62 dBm to +23 dBm Power Measurements industrial
The HP 3406A Broadband Sampling RF Voltmeter has an extremely wide 10kHz to 1.2GHz bandwidth with high impedance. Signals as small as 50 µV can be resolved on the Voltmeter's linear scale. Full Scale sensitivity from 1 mV to 3 V is selected in eight 10 dB steps and may be read directly from -62 dBm to +23 dBm for power measurements. Expand your measuremt capablities with the 11071A Accessory Probe Kit (sold seperately) Full scale accuracy is within 3% over the greatest part of the band, and within 5 to 13% from 10kHz to 100kHz and 100MHz to 1.2GHz. Maximum input is ±100 V DC, 30 V peak to peak and meter response time is < 3 S. Other features include a DC recorder output, sample hold output for connection to oscilloscopes (>200 Kohms load with < 1000 pF output is 0.316 V full scale), and peak or true RMS voltmeters if other absolute average measurements are required.
10mV to 1200V, 10uA to 2A 1ohm to 20Mohms, True RMS 30Hz to 100KHz industrial
The HP 3438A Digital Multimeter The 3438A Digital Multimeter is a quality-built autoranging meter with 5 functions of AC and DC Voltage, AC and DC Current, and Resistance. It interfaces to the HP-IB providing both addressable and talk-only modes. Auto ranging 3 1/2 digit multi-meter with 5 functions of ACV, DCV, ACI, DCI, and 0hms. built in HPIB provides both addressable and talk-only modes.
0.1V to 1000V, 0.1 Kohm to 10 Mohms True RMS 30Hz to 1MHz industrial
The HP 3455A Digital Voltmeter is a microprocessor controlled, 5 1/2 or 6 1/2-digit voltmeter for bench or systems applications. HP-IB controllability is standard. The standard True RMS converter gives AC measurements from 30Hz to 1MHz and the math function provide computational capability. The scale mode allows the user to offset, take ratios, or scale readings to give readouts in physical units. The auto-cal feature checks the DC volts and ohms operating circuits against internal references and corrects them digitally The standard instrument measures DC volts (0.1 to 1000 V range with up to 1 µV sensitivity in five ranges), AC volts (1 to 1000 V range in four ranges) (ACV or FAST ACV), and resistance (2 W or 4 W: 0.1 kohm to 10 Mohms in six ranges). 
Noise measurements: from -1 dBm to +121 dBm Input Impedance: 75, 135, 150, 600, or 900-ohms industrial
The HP 3555B Transmission & Noise Measuring Set conforms with Bell System requirements and makes noise measurements from -1 dBm to +121 dBm. Noise measurements: from -1 dBm to +121 dBm. Terminated input impedance: 75, 135, 150, 600, or 900-ohms, balanced.
30V to 100nV full scale 30dBm or dBV to -150dBm or dBV 15Hz to 50kHz industrial
The HP 3581C Balanced inputs and a speaker monitor have been incorporated for operator convenience in the 3581C Selective Voltmeter. The unit covers the frequency range of 15Hz to 50kHz. The display is a 5-digit LED readout, with resolution of 1Hz and accuracy of ±3Hz. Typical stability is ±10Hz/hour, after 1 hour ±5 Hz/°C. Automatic frequency control (AFC) hold-in range is ±800Hz. Linear amplitude is 30 V to 100 nV full scale and Log is 30 dBm or dBV to -150 dBm or dBV. 50Hz to 50kHz scan width (adjustable), with sweep times of 0.1 S to 2000 S. Single or repetitive scan modes. 
1000 meters 50 Kb/s industrial
The HP 37203A Up to 1000 meters. Uses twisted pairs for up to 50 kb/s transfer rate.
32MHz to 3.2GHz Extended Frequency Module industrial
The HP 3746A Selective Level Measuring Set makes fast, accurate selective level measurements. A built-in synthesizer gives high tuning accuracy and 1 Hz resolution across the entire 50 Hz to 32 MHz frequency range. This H40 Extended Frequency Module extends that range from 32MHz to 3.2GHz. 
4-Wire Switch or 2 Independent, 2-Wire Switches industrial
The HP 3777A Channel Selector is a 4-pole access switch for telecom applications. It may be configured as a single 4-wire switch or as a two, independent, 2-wire switches. Channel capacity is arranged by adding standard modules. Unselected channels are switched to 600 ohm terminations. Option H05 30 channels with WECO 310 connectors.
Barcode Reader industrial
The HP 39801A Barcode Reader
1 mV to 300 V RMS 10Hz to 10MHz industrial
The 400EL AC Voltmeter is a versatile meter which can also be used as an AC/DC converter and a wide-band amplifier. This is a compact, solid-state unit with log voltage scales from 1 mV to 300 V in 12 ranges. Frequency response from 10Hz to 10MHz. The AC amplifier offers an output of 150 mV rms for full scale indication and the AC/DC converter provides an output of 1 VDC for full scale indication. For take-anywhere operation, external battery operation is also provided. 
100µV to 300V RMS 20Hz to 4MHz industrial
The HP 400FL AC Voltmeter is primarily intended as a dB Meter, however it can indicate both V and dB. The meter has a linear dB scale with a logarithmic AC scale below. The voltage range is 100 µV to 300 V full scale. Meter calibration responds to the absolute average value of the applied signal, calibrated in RMS Volts from 20Hz to 4MHz. The accuracy as a % of reading is ±4% (20 to 40Hz), ±2% (40 to 100Hz), ±1% (100Hz to 1MHz), ±2% (1 to 2MHz), ±4% (2 to 4MHz). Input impedance is 10 Mohms. The AC amplifier output is 1 V rms open circuit for full scale meter indication. 
Power -65dBm to +44dBm 100 kHz to 26.5 GHz industrial
The HP 435A is an analog power meter, compatible with the entire series of HP 8480 Power Sensors. (sold seperately). Power Sensors are available to measure power levels from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 26.5 GHz. The meter provides <1% uncertainty, low noise and drift, and auto-zero. 
100V Peak 1 Amp industrial
The HP 44428A 16 Channel Actuator is used in the 3497A Data Acquisition System and consists of 16 mercury wetted form C SPDT relays. The actuator assembly can be used to switch test fixture power or to actuate alarm bells. Maximum voltage is 100 V peak while maximum current is 1 Amp. 
100V Peak 1 Amp industrial
The HP 44471-66501 General Purpose Relay Board
10 Megohms to 50 Ohms 5 Hz to 1 MHz industrial
The HP 465A Amplifier is a general purpose amplifier and impedance converter 10 Megohms to 50 Ohms. The 465A has selectable gain of 20 dB or 40 dB stable over a continuous frequency range of 5 Hz to 1 MHz.
0° to 360°, 10 ohms to 100 kohms 500kHz to 108MHz industrial
The HP 4815A RF Vector Impedance Meter provides all the convenience of "probe and read" measurements. In use, the probe is connected directly into the circuit to be evaluated, frequency is selected, and complex impedance is read. This type of measurement allows a straight forward adaptation to various jigs and fixtures for special measurements. Where only component values are to be determined, a quick mount adapter is provided to allow rapid measurements. For critical component applications, the unit to be evaluated may be mounted directly in its working circuit and its value determined in its actual environment, at the frequency of intent. Frequency range: 500kHz to 108MHz in 5 bands ±2% of reading. Impedance magnitude range: 10 ohms to 100 kohms in 9 ranges ±4% full scale. Phase angle range: 0 to 360° in 2 ranges. Phase angle calibration: increment of 2° Analogue outputs for magnitude and phase indications 
Displays Digital Signatures Comparative Testing to Known Good industrial
The HP 5004A Signature Analyzer is a tool for production and service troubleshooting of complex logic circuits. It recognizes and displays unique digital signatures associated with data nodes in a circuit under test. By comparing these actual signatures to the correct ones, a technician can back-trace to a faulty node. Patented signature analysis technique for rapid testing. 4-digit display. 10MHz clock speed. Data probe input impedance is 50Kohms to 1.4 V, nominal, shunted by 7 pF.
Displays 4 digit "fingerprint" Comparative Testing to Known Good industrial
HP's patented Signature Analysis technique enables the HP 5005A to display a compressed, four digit "fingerprint" or signature of the digital data stream at a logic node. Any fault associated with a device connected through the node will force a change in the data stream and consequently produce an erroneous signature. 
0.1Hz to 100MHz 8-Digits Resolution industrial
The HP 5315A Universal Counter measures signals over 0.1Hz to 100MHz range. Measurement Period: 10 ns to 105 Sec. Time Interval: 100 ns to 105 Sec. Time Interval Average: 0 ns to 105 Sec. Time Interval Delay: holdoff, variable delay of nominally 500 µs to 20 ms between START (channel A) and STOP (channel B). And Ratio: 0.1Hz to 100MHz, both channels. A totalize function with manual or external gating is also provided. All measurements, except totalize, have up to 8-digits resolution. Two channels provide time interval measurements. Includes: Option 001 = TCXO Timebase. 
0.1Hz to 100MHz 8-Digits Resolution industrial
The HP 5315B Universal Counter measures signals over 0.1Hz to 100MHz range. Measurement Period: 10 ns to 105 Sec. Time Interval: 100 ns to 105 Sec. Time Interval Average: 0 ns to 105 Sec. Time Interval Delay: holdoff, variable delay of nominally 500 µs to 20 ms between START (channel A) and STOP (channel B). And Ratio: 0.1Hz to 100MHz, both channels. A totalize function with manual or external gating is also provided. All measurements, except totalize, have up to 8-digits resolution. Two channels provide time interval measurements. Includes: Option 001 = TCXO Timebase.
0.1Hz to 1.3GHz 9-Digits Resolution industrial
The HP 5328A Universal Counter makes frequency, period, multiple point average, time interval, time interval average, totalize, ratio, voltage and electronically controlled totalize measurements. Burst and CW measurements to 100MHz. Resolution of 100 ns single shot time interval measurements. Time interval averaging has a resolution better than 10 ps for repetitive time intervals as short as 100 ps. Marker outputs (operational to 100MHz) shows real time triggering for use with oscilloscope monitoring. Timebase is 10MHz with stability <3x10E-07 per month. 9-digit display with 9th digit used only with channel C functions and zero suppression to left of reading. Switchable x1 and x10 attenuators for each of the two inputs. Options: Option 010 = High Stability Time Base. Option 011 = HP-IB Interface. Option 020 = DVM. Option 021 = High Performance DVM. Option 030 = 512MHz Channel C. Option 031 = 1300MHz Channel C. Option 040 = High Performance Universal Module. Option 041 = Programmable Input Controls Module (requires Option 011 for HPIB use).
Digital delays of 0 to 160 ms Width 5 ns to 160 ms industrial
The HP 5359A Time Synthesizer hi-resolution time synthesizer for calibration and precise generation of delayed sweeps and the control of external frequency counter gates. Digital delays of 0 - 160 ms. Delay increments 50 ps. Width 5 ns to 160 ms. HPIB interface. Jitter < 100 ps. Automatic Calibration.
8000 Measurements / second 11-Digits Resolution industrial
The HP 5370A 100MHz Universal Time Interval Counter. High-precision, time-interval measurements at up to 8000 measurements per second. Built-in statistics functions. Programmable over the HP-IB interface or easy setup via the logically-designed front panel. Time Interval: 20 ps single shot LSD, time intervals from 0 to 10 s, including negative time. Frequency: up to 100MHz with 11-digits of resolution in one second, gate times down to one period. Sensitivity of 100 mV p-p, 35 mV rms sine wave x attenuator setting. Computes Mean, Standard Deviation, Minimum, and Maximum. 
0 to 7.5VDC 3A industrial
The HP 6203B Power Supply is a low-cost bench supply rated at 0 to 7.5Vdc @ 3A. The unit is equipped with ten-turn voltage and current controls. The unit is metered and has CV/CC. Option 011: Internal Overvoltage Protection Crowbar. Option 028: 230 VAC ±10%, single phase input. Option 100: 87-106 Vac, 47-63Hz, single phase input. Option 220: 191-233 VAC, 47-63Hz, single phase input. Option 240: 208-250 Vac, 47-63Hz, single phase input. 
0 to 50 VDC 0 to 1.5A industrial
The HP 6226B Power Supply is a one-third rack width power supply. Supplies 0 to 50 Volts at 0 to 1.5 amps with ten-turn voltage and current controls for better output control. Rear panel master slave programmability. In the constant voltage mode the load regulation is ±(0.01% + 2 mV), in constant current mode the regulation is ±(0.01% + 250 µA). Easy-to-read meter. Option 040 = Interfacing for Multiprogrammer Operation. 
0 to 20 VDC 0 to 3 A industrial
The HP 6253A Power Supply features constant voltage/current modes with outputs available from 0 to 20 V at 0 to 3 A. Remote sensing. Remote programming. Auto-series/auto-parallel operation. Auto-tracking. Independently adjustable front and rear panel outputs. Voltage mode regulation ±(0.01% + 4 mV). Current mode regulation ±(0.01% + 250 µA). Input is 115 VAC (±10%), 48-440 Hz. Option 011 = Internal Overvoltage Protection Crowbar. Option 040 = Interfacing for Multiprogrammer Operation. 
0 to 36VDC 0 to 10 A industrial
The HP 6433B Power Supply is a SCR based regulated supply which provides good high current output capability but also outputs a slight amount of ripple. Constant-Voltage/Constant-Current modes. DC output from 0-36V @ 0-10A. Large easy-to-read meters continuously monitor output voltage and current. Bus bars and terminal blocks on the rear panel provide connections for input and output power, remote sensing, remote programming, and auto-series, parallel, and tracking connections. Unit also incorporates reverse voltage protection and a fused AC input. Operates from 115 VAC ±10%, single phase, 57-63 Hz. 
10Hz to 10MHz 3.16 Volts into 50 or 600ohms industrial
The HP 651B Oscillator is a sine wave oscillator. Stable, accurate signals which can be synchronized with an external source are instantly available over a frequency range from 10Hz to 10MHz. Covers 10Hz to 10MHz with flat response and low distortion. Output 3.16 volts into 50 or 600Ohms. Calibrated attenuator -70dBm to +23dBm. Metered output provides amplitude indication in dBm and Vrms scales. 
10Hz to 10MHz +11 dBm to -90 dBm into 50, 75, 135, 150, or 600 ohm industrial
The HP 654A Oscillator is a sine wave oscillator. Stable, accurate signals which can be synchronized with an external source are instantly available over a frequency range from 10Hz to 10MHz. Covers 10Hz to 10MHz in six bands with amplitude flatness of ±0 .5%. Output levels from +11 dBm to -90 dBm, 10 dB and l dB steps. Output impedance is 50ohm and 75ohm unbalanced, 135 ohm, 150 ohm, and 600 ohm balanced. 
Plotter 6 Pen office
Hewlett Packard 7475A Plotter 6 Pen.
Plotter 1 Pen office
Hewlett Packard 7550A Graphics Plotter
1 mV to 100 V Range 80 dB Single Channel industrial
The HP 7562A Log Converter is an 80 dB single channel log unit with both AC and DC modes. 1 mV to 100 V range. operates directly with X-Y, strip chart recorders and oscilloscopes. 
Pulse Width: 25nS to 3 S 300mV to 10Vpp industrial
The HP 8005A Pulse generator. Triple output, also includes a TTL output. Transition times: < 10nS to 2 S. Pulse Width: < 25nS to 3 s. Square wave: 0.15Hz to 10MHz. Amplitude: 300mV to 10Vpp. Repetition rate: 0.3Hz to 20 MHz. 
Delivers: 2048 Programmable Bits Dual Channel DC to 50 Mbits/s, 0 to 15V into 50 Ohms industrial
The HP 8018A Serial Data Generator is a powerful stimulator for serial digital systems and devices requiring high bit rate and fast pulses. Even preamble-data-post-amble data links patterns are feasible by combining prbs and programmed data. Option 001: HP-IB for data loading. The 8018A Serial Data Generator delivers: 2048 programmable bits. Dual channel operation. clean 6 ns pulses. Repetition rate from dc to 50 Mbits/s. Output amplitude is variable up to 15V into 50 Ohms. Digital Plugins Available industrial
The HP 8080A Pulse Generator Mainframe can be used with a variety of modules producing configurations that can be used for research and development in advanced technologies such as subnanosecond ICs, fiber optics, and nucleonics.0 to 15V into 50 Ohms DC to 50 Mbits/s industrial
The HP 8083A Output amplifier for Word Generator.16, 32, 64 bit Word Generation 300MHz industrial
The HP 8084A Word Generator plug in for HP8080A; 300MHz; 16, 32, 64 bit words.
5 Markers Save & Recall 9 Settings industrial
8350A Sweep Oscillator Mainframe provides swept and CW frequency functions. Adds five markers with extensive capabilities, versatile data entry and complete HP-IB programmability. Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. The 8350A is shown above with 83525B plug-in. Frequency range is dependent upon plug-in used. Mainframe features also include the ability to save & recall up to 9 different front-panel settings.10MHz to 8.4GHz 20 mW Output Power industrial
The 83525A RF Sweeper Plug-In has a frequency range of 0.01 to 8.4GHz, a leveled power output of 20 mW and a frequency accuracy of ±12MHz. It is designed for the 8350A/B.
Test Shielding Efectiveness of Small Enclosures to 5 GHz Comb Frequency Outputs: 1, 10, and 100 MHz industrial
Generates a comb of closely spaced, coherent unmodulated carriers used for measuring: Shielding effectiveness of small enclosures. As a reference source for radiated measurement systems. Long term performance monitoring. Investigation of measurement system. Comb frequency outputs: 1, 10, and 100 MHz increments, useable to 5 GHz. 
100kHz to 110 MHz 2 Input Tracking Receiver industrial
The 8407A Network Analyzer covers the frequency range 100kHz to 110 MHz. This two-input tracking receiver uses both inputs to form their magnitude ratio and phase difference before routing to the display. Accepts 8412B or 8413A display units.
0.11GHz to 18GHz 2 Input Tracking Receiver industrial
The 8410B Network Analyzer covers the frequency range from 0.11GHz to 18GHz when used with 8411A/018 Frequency Converter. This two-input tracking receiver uses both inputs to form their magnitude ratio and phase difference before routing to the display. Accepts 8412B or 8413A display units.
110 MHz to 12.4 GHz Network Analyzer Frequency Converter industrial
8411A Frequency Converter 110 MHz TO 12.4 GHz 0.11GHz to 18GHz Network Analyzer Frequency Converter industrial
8411A Frequency Converter 110 MHz TO 12.4 GHz. Option 018 Frequency Converter 0.11GHz to 18GHz. 
80 dB ±180° Range. industrial
The 8412B Phase Magnitude Display plug-in is a CRT display for 8410 or 8407A Network Analyzers. Relative amplitude in dB and/or relative phase in degrees between reference and test channel inputs versus frequency. 80 dB and ±180° range.
Phase ±180° Amplitude ±30dB industrial
The 8413A Phase/Gain Indicator plug-in meter display unit, for 8410 Network Analyzer Mainframes, displays relative amplitude in dB or relative phase in degrees between reference and test channels input. Amplitude range is ±30, ±10, ±3 dB full scale, phase range is ±180°, ±60°, ±6° full scale.
800MHz to 2400MHz +10 dBm to -127 dBm into 50ohms industrial
The 8614A Signal Generator provides stable, accurate signals from 800 to 2400MHz with selectable functions including CW, leveled output, square-wave modulation, and external AM, FM, and pulse modulation. When needed, modulation can be accomplished simultaneously with or without leveling. RF output power of +10 dBm to -127 dBm into a 50-ohm load is available plus a second uncalibrated output (approx. -3 dBm) is provided on front-panel. Both frequency and attenuation are set on direct-reading digital dials offering simple setup and operator convenience. Option 001 = External modulation input connectors on rear panel in parallel with front-panel connectors. RF connectors on rear panel only. 
2GHz to 18.6GHz 0 to +13 dBm industrial
The 86209B Sweep Oscillator Plug-In is designed for 8620 Series Sweep Oscillators. Provides CW or Continuous Swept 2GHz to 18.6GHz frequency coverage. Power output is calibrated from 0 to +13 dBm in 1 dB increments with ±0.25 dB flatness and excellent linearity (2MHz) over the entire frequency range.
Sweep 10 msec to 100 sec Output: 0 to 10 V industrial
The 8620A Sweep Oscillator Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide >10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3 to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate bands and their respective frequency scales can be selected. Start-Stop sweep points may be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW, continuous wave, makes the sweeper a signal generator, which may be modulated, or allows manual sweeps for frequency calibration. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band, and indicated by either amplitude or intensity. Frequency: 3MHz to 18GHz based on RF Plug-In. Sweep functions: Start-Stop, Delta, CW, Remote Programmed. Sweep modes: auto, line, external. Sweep time: 10 msec to 100 sec. Sweep output: direct coupled, 0 to 10 V. Modulation: Internal AM 1 kHz; External FM based on RF unit. Marker: 1 Option 001 = Programmable Source.Sweep 10 msec to 100 sec Output: 0 to 10 V industrial
The 8620C Sweep Oscillator Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide >10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3 to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate bands and their respective frequency scales can be selected. Start-Stop sweep points may be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW, continuous wave, makes the sweeper a signal generator, which may be modulated, or allows manual sweeps for frequency calibration. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band, and indicated by either amplitude or intensity. Frequency: 3MHz to 18GHz based on RF Plug-In. Sweep functions: Start-Stop, Delta, CW, Remote Programmed. Sweep modes: auto, line, external. Sweep time: 10 msec to 100 sec. Sweep output: direct coupled, 0 to 10 V. Modulation: Internal AM 1 kHz; External FM based on RF unit. Marker: 1. Option 001 = Programmable Source.10MHz to 2.4GHz 0 to +13 dBm industrial
The 86222B Sweep Oscillator Plug-In is designed for 8620 Series Sweep Oscillators. Provides CW or Continuous Swept 10MHz to 2.4GHz frequency coverage. Power output is calibrated from 0 to +13 dBm in 1 dB increments with ±0.25 dB flatness and excellent linearity (2MHz) over the entire frequency range. Offers a crystal marker system that provides comb markers at 1, 10, or 50MHz. Option 002. 70 dB Step Attenuator (10 dB steps).
7KHz to 70MHz +20 dBm to -90 dBm into 50ohms industrial
8651A Oscillator is a sine wave oscillator. Stable, accurate signals which can be synchronized with an external source are instantly available over a frequency range from 7KHz to 70MHz. Output levels are metered on the front panel. Meter scale is in dBm and Vrms. Covers 7KHz to 70MHz in seven bands with amplitude flatness of ±0 .5%. Output levels from +20 dBm to -90 dBm, in seven 10 dB steps. Output impedance is 50ohm.
10kHz to 990MHz -127 dBm to +13 dBm into 50ohms industrial
The 8656A Synthesized Signal Generator provides frequency coverage from 100kHz to 990MHz (with under range to 10kHz). This wide range covers the IF and LO frequencies as well as the RF frequencies of most receivers. It also allows testing in a variety of communication systems including the 800MHz FM mobile band and some telemetry bands. Frequency resolution of 100 or 250Hz allows convenient setting of increments including 6.25kHz channel spacings. Output levels of -127 dBm to +13 dBm. Internal modulation (2 digit display): 400 and 1000Hz, AM, FM or combination. HP-IB Interface. Option 002 = Rear Panel Input and Output 
1MHz to 2600MHz 2Hz resolution industrial
The 86603A RF Section Plug-In covers the frequency range 1 to 2600MHz. 2Hz resolution. RF section for 8660A or 8660C Mainframe. Option 001 = No RF Output Attenuator. Option 002 = Adds Phase Modulation Capability. Option 003 = Allows Operation with 8660A Mainframe 
Keyboard Entry of CW Frequencies AM, FM, FM, or Pulse Modulation industrial
The 8660C Synthesized Signal Generator mainframe utilizes a wide range of available plug-ins to make up a complete Signal Generator System. Offers direct keyboard entry of CW frequencies. Increased performance capabilities over the 8660A including digital sweep, frequency stepping, control of frequency with a tuning knob, and a ten-digit numerical display. Auto, Single, or manual digital sweep with selectable speeds of 0.1, 1, or 50 seconds. Direct keyboard entry of CW output frequencies. 10kHz to 2600MHz (plug-in dependent). Synthesizer stability and accuracy. 1Hz resolution (2Hz above 1300MHz). Calibrated output over >140 dB range. AM, FM, FM, or Pulse Modulation. Fully TTL programmable. Option 001 = ±3 x 10E-9/day internal reference oscillator. Option 003 = Operation from 50 to 400Hz line. Option 005 = HP-IB programming interface (cables not supplied).
External AM and Pulse modulation 50-ohms (Pulse) and 600-ohms (AM) industrial
The 86631B Auxiliary Section Plug-In provides both external AM and Pulse modulation for both the 8660 Series mainframes. This plug-in must be used when another modulation section is not installed. The input impedance is 50-ohms (Pulse) and 600-ohms (AM).
2 to 12.4GHz Impedance: 50-ohms industrial
The 8743B Reflection Transmission Test Unit is a wideband RF power splitter and reflectometer with calibrated line stretcher. Pushbutton operated for either transmission or reflection measurement with network analyzer. Designed for use with the 11610B Test Port Extension Cable. Frequency range: 2 to 12.4GHz. Impedance: 50-ohms. Source reflection coefficient: < 0.09, 2.0 to 8.0GHz; < 0.13, 8.0 to 12.4GHz. Connectors: RF input, type N(F), all other connectors APC-7. Remote programming: ground closure.
2 to 12.4GHz Impedance: 50-ohms industrial
The 8901A Modulation Analyzer combines the capabilities of several RF instruments to give complete, accurate characterization of modulated signals in the 150 kHz-1300 MHz frequency range. Measures AM and FM with 1% accuracy. Measures RF frequency and RF power (1 mW to 1 W). Completely automatic. Low internal noise. Option 002 1x10E-09/day Internal Reference. Option 003 Connections for External Local Oscillator. Option 004 Operation from 48 to 440Hz power (Temp. <40°C). Option 010 AM and FM Calibrators.
HP-IB Cable Switch Switch 1 Cable to 3 Cables industrial
HP-IB Three Position SwitchGPIB 3 Switch ABC Switch office
Hewlett Packard 92205Y HPIB GPIB IEEE-488 ABC SWITCH 