TEST ELECTRONICS’ TE-1200 Side Press Fixture
Side Access for Edge Connectors, 90 degree Headers, and Power Connectors. TE-1200 Front View

TE-1200 Side Press
The TE-1200 Side Press is shown under the clear cover of this test fixture. The TE-1200 side press fits all TE-1000 series bed of nails style test fixtures and provides side access for probing many types of 90 degree connectors including headers, RJ-11, RJ-45, 1/4" 1/8" 1/16" Tip/ring/sleeve phone jacks, barrel style power connectors, etc..


Note: this is a customized tester shown for reference only. Your tester’s customizations will differ slightly depending on the application.

 

90 degree Connector Side Probing Access
Shows the fixture probing two 90 degree connectors mounted on the side of this board under test. The side press automatically extends  forward and makes contact with the board under test when the cover is closed. When the press cover is opened, the side press releases and retracts again .

Fixture Open Press Retracted
Press cover is open. Side press unit is retracted back
Fixture Partially Closed. Press Starts to Extend
Press cover is partially closed. Side press unit starts moving forward to contact board.
Fixture Closed. Press Fully Extended
Press cover is fully closed. Side press unit makes full contact with the board under test

Specifications
TE-1200 Side Press maximum pin count 50 pins.
TE-1000 series fixture pin count 100 pins.
Estimated Life (operations) 1,000,000 cycles

Low Cost Test Solutions:
Now combine the TE-1200 test fixture with National Instruments data acquisition boards and perform functional, in-circuit, or bare board testing right on your bench top!

Compatibilities:
» Checksum, TTI, Testronics, and Other MDA's
» Genrad 2270/71/72/75/76/8X
» Hewlett/Packard 3060/61/62/65/70/72/75
» Tektronix MI 5010 Multifunction Interface System
» Teradyne 800/10/75 & 1800/10/20

Computer Test system compatiblity:NI Boards
»
Windows Operating System
» Mac Operating System

Test Electronics, a leader in test fixture technology has teamed up with National Instruments a leader in Virtual instrumentation to bring you high quality cost effective solutions to functional, in-circuit, and bare board testing!
The PCI-6071E DAQ Boards shown here are products of National Instruments tm


Test Electronics, a leader in test fixture technology. Creating innovations in testing by utilizing the latest high tech tools to their full potential.

Back to Bed of Nails Fixtures
E-mail Applications Engineering
Go to Home Page
End of page