Low Cost High Performance PC Board Test Fixture
| TE-1000 PC
Board Test Fixture Simple Low cost Bed of Nails Clamshell style Circuit board test fixture. Test Electronics will prescision drill and customize the TE-1000 bed of nails style test fixture for your circuit board. Next, add a desktop or rack mount computer, plug in low cost off the shelf data aquisition boards and create a complete full performance cost efficient functional, in-circuit, or bare board tester. Fixture kits are also available for those who like to do it themselves. |
|
 |
|
| This view with the bottom panel removed shows the easy accessibility provided in our fixture designs. In this example of a functional tester, an internal power supply powers the board under test. Front panel snap dome switches and rotary switches are mounted and interconnected with circuit boards we manufacture in house. Wiring is is connected with removable connectors then neatly bundled for easy troubleshooting and modification. | |
 |
|
| This fixture demonstrates our use of heat sinking and dissipation techniques from high wattage load resistors. Vertical mounting of a customer supplied circuit board internal to the fixture, and extensive use of in house fabricated circuit boards to reduce front panel wiring. | |
 |
|
| This fixture demonstrates directly powering the circuit board under test with a high current AC transformer connected directly to the back sides of high current spring loaded test pins which are offset to provide necessary clearance space for a connector mounted on the back side of the board under test. Also shown is our use of heat sinking and dissipation techniques from high wattage load resistors, and our use of in house fabricated circuit baords to reduce front panel wiring. | |
 |
 |
| High speed signals, and noise
sensitive signals are wired with twisted pairs or coaxial cable. Data pins are wire
wrapped to the appropriate rear panel connectors where they are cabled out to an insrument
board. Our intensive labeling for error free cable connections to the test equipment. This promotes quick and easy setup. We live up to our Understand-it-at-a-glance philosophy for intuitive, easy to learn and understand operation. |
|
TE-1000 PC Board Test Fixture
Simple Low cost Bed of Nails Clamshell style Circuit board
test fixture. Test Electronics will prescision drill and customize the TE-1000 bed of
nails style test fixture for your circuit board. Next, add a desktop or rack mount
computer, plug in low cost off the shelf data aquisition boards and create a complete full
performance cost efficient functional, in-circuit, or bare board tester.
Specifications
Maximum pin count 200 pins
Estimated Life (operations) 1,000,000 cycles
Low Cost Test Solutions:
Now combine the TE-1000 test fixture with National Instruments data acquisition
boards and perform functional, in-circuit, or bare board testing right on your bench top!
Compatibilities:
» Checksum, TTI, Testronics, and Other
MDA's
» Genrad 2270/71/72/75/76/8X
» Hewlett/Packard 3060/61/62/65/70/72/75
» Tektronix
MI 5010 Multifunction Interface System
» Teradyne 800/10/75 & 1800/10/20
Computer Test system compatiblity:
» Windows Operating System
» Mac Operating System
Test Electronics, a leader in test fixture
technology has teamed up with National Instruments a leader in Virtual instrumentation to
bring you high quality cost effective solutions to functional, in-circuit, and bare board
testing!
The PCI-6071E DAQ Boards shown here are
products of National Instruments tm
Test Electronics, a leader in test fixture technology. Creating innovations in testing by utilizing the latest high tech tools to their full potential.
View Adobe PDF File
Back to Bed of Nails Fixtures
E-mail Applications Engineering
Go to Home Page
End of page